N.I.C.E.
Electronics
The NuAire Incubator Control Electronics is a
state-of-the-art microprocessor based control
system specifically designed to deliver the precise
control requirements for the chamber environment,
providing optimum programmable conditions for
culture growth. The microprocessor is "user-friendly"
with status indicators, LED display of control
parameters and a touch control keypad to permit
efficient operator entry of data.
Accurate
Infrared CO2 Control System
The NuAire DH AutoFlow Incubator uses a microprocessor
based, non-dispersive infrared CO2 sensor. The
amount of energy diffused to the detector is an
exact logarithmic function of the CO2 concentration
in the gas between source and detector. The wavelengths
used are absorbed by a filter in the CO2 bandwidth
making the measurements insensitive to other components,
such as water vapor. Advanced design provides
a very stable drift-free output requiring less
frequent calibration. The sensor is within the
chamber air plenum so very accurate CO2 control
is achieved. Class 100 Air Flow
Within the Chamber
A HEPA filter surrounds the blower on the positive
pressure side and continuously cleans the circulated
chamber air within the incubator. The HEPA filter
uniformly distributes and cleans the air within
the chamber at a rate of one complete change
per minute.
Fast Recovery Time
Temperatures recovery within the chamber is
very quick. For frequent opening and closing
of the door, the temperature recovers at a rate
of 0.3C/mn per minute.
Continuous Humidity Supply System
A relative humidity level of 95% is achieved
in the incubator by use of the large stainless
steel pan filled with distilled water, and placed
on the bottom of the chamber. It is necessary
to properly set the door and front perimeter
heater to reduce condensation within the chamber.
Economical Value
The DH AutoFlow combines reliable, accurate,
stable temperature and infrared gas controls
with quality and value to meet laboratory performance
for optimum growth conditions in the most demanding
environments. The DH AutoFlow represents a special
Extraordinary Value.
Quality Assurance
Full factory testing is your assurance of reliability
in the laboratory. Each product is thoroughly
inspected and tested before shipment. Quality
control is maintained by constant surveillance
over manufacturing processes. Eleven individual
tests are performed before the product is delivered
to you. |
